Wacker Neuson G 150, Operator'S Manual, Page: 36 / 74

Operation G 150 / 180 / 240
wc_tx000867gb.fm
36
2.14 Connection Lugs
Location and
description
The customer connection lugs are located on the lower right side of the control box
behind a hinged terminal door. The lugs provide connection points for attachment
of outside loads.
Connecting to
the lugs
„
Make connections to the lugs by running the power cables up through the slots
in the bottom of the panel and into the lug.
„
Use a 5/16-inch or 8 mm Allen wrench to tighten the cable connections in
place.
2.15 Ground connection
Location The ground connection (r) is located next to the connection lugs.
Connection Connect the ground lug to a good earthen ground for proper operating safety in
compliance with NEC and local standards.
wc_gr005273
WARNING
Electrocution hazard! High voltage is present inside the hinged terminal door when
the generator is operating.
f Do not open the hinged terminal door unless the engine is stopped.
r
wc_gr005280