Wacker Neuson ET18, Operator'S Manual

Page: 70 / 298

4-20
OM ET18/20/24 us 1.3 * et18_20_24i400.fm
4
Protective structures
Protective structures are additional elements that protect the operator
against hazard. These elements can be installed later on or as standard
equipment.
DANGER
Accident hazard due to modified cab and protective
structures!
Causes severe injury or death.
►
No drilling, cutting or grinding.
►
Do not install any brackets.
►
No welding, straightening or bending.
►
Replace the complete protective structure if it is damaged,
deformed or cracked.
►
Contact a Wacker Neuson service center in case of doubt.
►
Retrofit and repair work may only be performed by a Wacker
Neuson service center.
Information
Machine operation is only allowed with a correctly installed and
intact cab or correctly installed and intact canopy.
For additional protection, only use correctly installed and intact
Wacker Neuson protective structures that have been released
for the machine.
Information
Only a Wacker Neuson service center may install the protective
structures for the first time.
Responsibility for machine equipped with protective structures
The decision regarding the necessary protective structures (type and level
I or II) must be made by the machine owner and depends on the specific
operating situation.
The machine owner must observe the national regulations and he must
inform the operator on the protective structure to be used in a specific
operating situation.