manualshive.com logo in svg

Wacker Neuson ET18, Operator'S Manual

Share
Download
Wacker Neuson ET18 Operator'S Manual Download Page 176

7-14

OM ET18/20/24 us 1.3 * et18_20_24w700.fm

 

7

7.4

Maintenance accesses

Engine cover

WARNING

Burn hazard due to hot engine parts!

Can result in severe injury or death.

►

Stop the engine and allow it to cool down at least 10 minutes.

WARNING

Injury hazard due to rotating parts!

Rotating parts can result in severe injury or death.

►

Open the engine cover only at engine standstill.

CAUTION

Injury hazard due to open engine cover!

Can cause injuries.

►

Take care not to knock your head on the open engine cover.

Opening:

1. Stop and park the machine. Stop the engine. See “Preparing 

lubrication”.

2. Open the engine cover by pressing button 

A

.

The engine cover is supported by a gas strut.

Closing:

Firmly press down the engine cover.

Locking and unlocking:

The engine cover is locked with the starting key.

Turn the starting key in lock 

A

 to the right 

R

.

➥

Engine cover locked.

Turn the starting key in lock 

A

 to the left 

L

.

➥

Engine cover unlocked.

Fig. 223: Engine cover lock

A

R

L

Summary of Contents for ET18











































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands