Wacker Neuson E 3000 LB, Operator'S Manual, Page: 141 / 214

wc_tx001803gb.fm
141
E 3000 Maintenance
Continued from the previous page.
7. Open valve #6 (right hose reel supply valve).
8. Move the right pump switch (b) to the ON position and watch the HTF reservoir
sightglass (c) , then move the right pump switch to the OFF position when the
level is between the minimum and maximum marks on the sightglass.
NOTICE: Do not overfill the HTF reservoir. Doing so may damage the machine.
9. Move valve #3 to the normal position.
10.Remove the fill hose from the HTF container. Allow any HTF within the hose to
drip back into the container. Cap the hose if a cap is included.
11.Move the fill hose to its storage location under the hose reel.
12.Open valve #2 and close valve #3 simultaneously.
Result The HTF reservoir has now been filled.