Wacker Neuson E 3000 LB, Operator'S Manual, Page: 134 / 214

wc_tx001803gb.fm
134
Maintenance E 3000
8 Maintenance
8.1 Periodic Maintenance Schedule
The table below lists basic machine maintenance. Tasks designated with check
marks may be performed by the operator. Tasks designated with square bullet
points require special training and equipment.
Note: Test the trailer breakaway system monthly.
Note:
Task
Interval*
(hours of service)
Daily 2 Week Yearly
--- (50) (1200)
Inspect hose couplings.
3
Clean quick-connect
couplings
3
Inspect hoses and
connectors.
3
Inspect electrical cords/
connections.
„
Check HTF level. Fill if
necessary.
3
Check/adjust burner air
setting.
„
Check/adjust fuel pressure.
„
Check/adjust electrodes.
„
Replace burner nozzle.
„
Clean HTF strainer.
„
Replace fuel filter.
„
Lubricate hose reel chain.
„
Lubricate hose reel
bearings.
„
Clean turbulator tubes.
„
Inspect rope gasket.
„
Test the burner exhaust and
adjust the settings.
As needed or upon changing job sites
* Use whichever comes first, calendar time or service hours.