Wacker Neuson DW100, Operator'S Manual

Page: 175 / 228

BA D18 us* 1.1 * D18w700.fm
7-31
Maintenance 7
Water/hydraulic oil radiator, fuel cooler, charge-air cooler
The water/hydraulic oil radiator, the fuel cooler and the charge-air cooler
(option) are located behind fan grid
A .
1. Stop and park the machine. Stop the engine – see “Preparing
lubrication” on page 7-8 .
2. Remove dust and other foreign bodies from the fan grid with
compressed air.
3. In case of heavier dirt, remove the 12 screws B and fan grids A .
4. Carefully clean the radiator with unlubricated compressed air with a
max. 2 bar (29 psi).
Install fan grids A again and fasten them with 12 screws B .
Condenser (option)
The condenser is located behind cover C on the right.
1. Remove 4 screws D and cover C .
2. Open the maintenance flap on the right.
3. Blow compressed air from the inside to the outside to remove dust and
other foreign bodies from the fins of condenser E .
4. Close and lock the maintenance flap on the right.
5. Install cover C .
Fig. 189
A
A
B
Fig. 190
C
D
Fig. 191
E