Wacker Neuson DW100, Operator'S Manual

Page: 143 / 228

BA D18 us* 1.1 * D18t600.fm
6-9
Transportation 6
6.3 Transporting the machine
1. Install the center-pivot prop.
2. Firmly fasten the machine on the loading area with tie-down points A
with slings of appropriate size. Observe the legal regulations.
3. Before transporting the machine through wet weather:
Close the exhaust pipe.
4. The driver of the transport vehicle must observe the following before
departure:
- Permitted overall height, width and weight of the transport vehicle
including the dumper.
- The legal regulations of the countries where transport is to take place.
Information
Only use OSHA-approved lifting devices.
Use edge protectors to avoid damage both to the machine and the OSHA-
approved lifting devices.
Information
The manufacturer’s warranty shall not apply to accidents or damage
caused by loading or transporting.
Fig. 167
A
A