BA DT10 en - Edition 1.5 * dt10b520.fm
5-19
Maintenance
Drain hydraulic oil
☞
Perform the starting aid as follows:
• Retract all hydraulic cylinders
• Clean the area around filler cap
C
with a lint-free cloth
• Place a sufficiently large container under the place where the oil is drained
• Open filler cap
C
• Wait for a moment (about 3 minutes) until the oil has been completely drained from
the tank.
• Close filler cap
C
Environment!
Collect the drained oil in a suitable container and dispose of it by an environ-
mentally safe manner!
Replacing the hydraulic oil filter cartridge
Exchange filter cartridge
A
as follows:
☞
Stop the engine
☞
Unscrew screws
B
to take the filter out of the mount
☞
Unscrew the nut
C
on the filter element
A
☞
Insert the new filter cartridge
A
☞
Ensure that seals
D
are properly seated
☞
Tighten nut
C
on filter cartridge
A
☞
Ensure
that all dirt (dust) has been removed
☞
Insert the filter in its mount
☞
Tighten screws
B
again
Environment!
Collect the drained oil in a suitable container and dispose of it by an environmentally safe
manner!
Environment!
Dispose of filter cartridge
A
in an environmentally friendly manner.
Fig. 85: Hydraulic oil drain plug
C
Fig. 86: Replacing the oil filter cartridge
A
C
B
D
Summary of Contents for DT10
