5-6
BA DT10 en - Edition 1.5 * * dt10b510.fm
Maintenance
The substructure must be raised and the maintenance prop installed for maintenance and
service work. Perform the starting aid as follows:
☞
Unscrew screws
A
☞
With the skip fully tilted, raise the substructure by pressing on the upper edge of the skip
☞
Remove the maintenance prop
B
from the transport bracket
☞
Insert the maintenance prop
B
in the corresponding bracket
☞
Secure the maintenance prop
B
with the screws
A
Fig. 67: Maintenance prop
A
Fig. 68: Maintenance prop
Fig. 69: Maintenance prop
B
A
Summary of Contents for DT10
