Wacker Neuson DPU 7060SC, Operator'S Manual, Page: 18 / 42

Description
T01042GB
16
4.7 Changing the transmission channel
You can set the sending channel in the sender and on the decoder on
the switch (v).
To change the channel on the sender, open the sender and move it to
one of the three possible positions..
The decoder must be set to the same channel as the transmitter.
After setting the desired channel, check the setting by switching on the
vibratory plate and the sender (see ”Activating the Machine”) – if the
channel selections match, the LED ring (b) on the receiver eye will
begin blinking.
4.8 Safety functions
To enhance the safety of the operator, the machine is equipped with a
function that automatically ceases all dangerous movements as soon
as the operator comes too close to the moving machine. All functions
are reactivated when the operator leaves the safety zone.
v
v