manualshive.com logo in svg

Wacker Neuson CT 36-400E, Operator'S Manual

Share
Download
Wacker Neuson CT 36-400E Operator'S Manual Download Page 29

CT 36-400E

Maintenance

29

3.5

Storage

If trowel is being stored for more than 30 days:

Cover trowel and motor and store in a clean, dry area.

3.6

Troubleshooting

 

Problem / Symptom

Reason / Remedy

Trowel does not develop full 

speed.

•

Power supply is not proper voltage.

•

Clean debris from moving parts and trowel blades.

Motor runs; poor trowel opera-

tion.

•

Check belt for wear or damage. Tighten belt if neces-
sary.

•

Clean debris from moving parts and trowel arms.

Motor does not run, or runs 

erratically.

•

Check motor on/off switch position.

•

Phase rotation of motor may be mismatched with the 
power supply. Turn on/off switch to opposite side.

•

Check fuse in control box. Replace if necessary.

Motor stops, won't restart.

•

Motor overload switch has tripped. Contact Wacker 
Corporation or a certified electrician.

•

Check fuse in control box. Replace if necessary.

Summary of Contents for CT 36-400E





















































Reviews:

No comments

Brands by name

Popular brands

Load more brands