Wacker Neuson CT 36-400E, Operator'S Manual

Page: 10 / 52

Safety Information CT 36-400E
10
1.3 Service Safety
A poorly maintained machine can become a safety hazard! In order
for the machine to operate safely and properly over a long period of
time, periodic maintenance and occasional repairs are necessary.
1.3.1 DO NOT attempt to clean or service machine while it is plugged in to
the power supply. DO NOT wash machine with electrical covers
removed. DO NOT use a high pressure washer to clean electrical
equipment.
1.3.2 DO NOT run motor while it is disconnected from machine in order to
avoid injury due to exposed rotating parts.
1.3.3 DO NOT remove blades while the machine is hanging overhead.
1.3.4 ALWAYS support the machine securely before changing blades.
1.3.5 ALWAYS operate the machine with all safety devices and guards in
place and in working order.
1.3.6 ALWAYS keep the work area free of debris in order to reduce the
chance of an accidental fire.
1.3.7 Replace worn or damaged components with spare parts designed and
recommended by Wacker Neuson Corporation.
1.3.8 Keep the machine clean and labels legible. Replace all missing and
hard-to-read labels. Labels provide important operating instructions
and warn of dangers and hazards.
1.3.9 ALWAYS handle blades carefully. The blades can develop sharp
edges which can cause serious cuts.
1.3.10 Store the machine properly when it is not being used. The machine
should be stored in a clean, dry location out of the reach of children.
1.3.11 Keep machine clean for better and safer performance. Make sure
motor cooling fins are kept clean to prevent overheating.
1.3.12 Perform periodic maintenance as recommended in the Operator’s
Manual. Follow lubricating instructions.
WARNING