Wacker Neuson bs65y User Manual Download Page 7

1A-2

1A

OPERATION

BS65Y

Laws Pertaining to Spark Arresters

Notice:

State Health Safety Codes and Public Resources Codes dictate when an engine

must use a spark arrester.  State codes will also specify that a spark arrester be rated by
the United States Forest Service.

The correct spark arresting muffler for use on this machine is WACKER P/N 58406.

1.1

Safety Information

This manual contains DANGER, WARNING, CAUTION, and NOTE callouts which must be followed to reduce the
possibility of personal injury, damage to the equipment, or improper service.

CAUTION:

  Used without the safety alert symbol,

CAUTION indicates a potentially hazardous situation

which, if not avoided, may result in property damage.

Note: 

 

Contains additional information

important to a procedure.

This is the safety alert symbol. It is used to alert you to potential
personal injury hazards. Obey all safety messages that follow
this symbol to avoid possible injury or death.

DANGER indicates an imminently hazardous

situation which, if not avoided, will result in

death or serious injury.

CAUTION indicates a potentially hazardous
situation which, if not avoided, may result in

minor or moderate injury.

WARNING indicates a potentially hazardous

situation which, if not avoided, could result in

death or serious injury.

!

WARNING

!

CAUTION

!

!

DANGER

Summary of Contents for bs65y


















Reviews: