1A-9
BS65Y
OPERATION
1A
1.15 Periodic Maintenance Schedule
Daily
After
Every
Every
Every
before
first
week
month
3 months
starting
5
or
or
or
hours
25 hrs.
100 hrs.
300 hrs.
* Change ramming system oil after first 50 hours of operation.
Check fuel level.
Check oil level in sightglass.
Check cannister type air filter.
Replace filter element as required.
Tighten ramming shoe hardware.
Check and tighten engine cylinder screws.
Check and tighten external hardware.
Clean engine cooling fins.
Clean and check spark plug gap.
Replace spark plug.
Clean recoil starter.
Change ramming system oil.*
Clean engine muffler and exhaust port.
1.16 Canister-Type Air Cleaner
1. To remove air cleaner, unsnap spring clips
(j)
, and
remove cover
(k)
and filter element
(l)
.
2. Gently tap element on flat surface to knock off loose
dirt. Be careful not to damage rubber seals or dent
element. If element is heavily soiled or wet, replace it.
Note:
DO NOT
wash or use compressed air to clean
filter element.
3. Place element on bracket. Replace cover. By press-
ing centers of clips in toward cover, the clips will snap
into place. Be sure cover is properly seated and clips
securely in grooves on cover before starting machine.
k
l
j
1002SD06
