Wacker Neuson bs65y User Manual Download Page 6

BS65Y

vi

TO OBTAIN WARRANTY SERVICE:

You must take your WACKER product along with proof of original purchase date, at your expense, to any WACKER
authorized dealer during their normal business hours. Claims for repair or adjustment found to be caused solely by
defects in material or workmanship will not be denied because the engine was not properly maintained and used.

EXCLUSIONS:

FAILURES OTHER THAN THOSE RESULTING FROM DEFECTS IN MATERIAL OR WORKMANSHIP ARE NOT
COVERED BY THIS WARRANTY. THIS WARRANTY DOES NOT EXTEND TO EMISSION CONTROL SYSTEMS
OR PARTS WHICH ARE AFFECTED OR DAMAGED BY OWNER ABUSE, NEGLECT, IMPROPER MAINTENANCE,
MISUSE, MISFUELING, IMPROPER STORAGE, ACCIDENT AND/OR COLLISION, THE INCORPORATION OF, OR
ANY USE OF, ANY ADD-ON OR MODIFIED PARTS, UNSUITABLE ATTACHMENTS, OR THE UNAUTHORIZED
ALTERATION OF ANY PART.

THIS WARRANTY DOES NOT COVER REPLACEMENT OF EXPENDABLE MAINTENANCE ITEMS MADE IN
CONNECTION WITH REQUIRED MAINTENANCE SERVICES AFTER THE ITEM’S FIRST SCHEDULED RE-
PLACEMENT AS LISTED IN THE MAINTENANCE SECTION OF THE PRODUCT OWNER’S MANUAL, SUCH AS
SPARK PLUGS AND FILTERS.

DISCLAIMER OF CONSEQUENTIAL DAMAGE AND LIMITATIONS OF IMPLIED WARRANTIES:
WACKER DISCLAIMS ANY RESPONSIBILITY FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES SUCH AS
LOSS OF TIME OR THE USE OF THE POWER EQUIPMENT, OR ANY COMMERCIAL LOSS DUE TO THE FAILURE
OF THE EQUIPMENT; AND ANY IMPLIED WARRANTIES ARE LIMITED TO THE DURATION OF THIS WRITTEN
WARRANTY. THIS WARRANTY IS APPLICABLE ONLY WHERE THE  U.S. EPA EMISSION CONTROL SYSTEM
WARRANTY REGULATION IS IN EFFECT.

Emission Control System Warranty Parts

SYSTEMS COVERED

PARTS

BY THIS WARRANTY

DESCRIPTIONS

FUEL METERING

CARBURETOR ASSEMBLY

EXHAUST SYSTEM

MUFFLER

AIR INDUCTION

AIR FILTER HOUSING
AIR FILTER ELEMENT*

IGNITION

FLYWHEEL MAGNETO
IGNITION MODULE
SPARK PLUG CAP
SPARK PLUG*

MISCELLANEOUS PARTS

TUBING, FITTINGS, SEALS, GASKETS
AND CLAMPS ASSOCIATED
WITH THESE LISTED ITEMS

* Indicates expendable maintenance items.

Summary of Contents for bs65y


















Reviews: