Wacker Neuson bs65y, User Manual

Page: 11 / 17

1A-6
1A OPERATION BS65Y
1014SD91
c
2
c
3
c
1
d
1002SD27
a
2
a
1
1005SD68
1002SD08
b
1
b
2
f
1.7 Recommended Fuel
This rammer engine requires a two-cycle gasoline/oil
mixture.
Note:
Use 25:1 mixture for first tank of fuel only. Use
50:1 mixture thereafter.
Mix regular unleaded gasoline and two-cycle / outboard
motor oil in separate container before filling tank.
Fuel Ratio 50:1
Gasoline Oil Gasoline Oil
1 gallon 2.5 ounces 5 liters 100 ml
3 gallons 8.0 ounces 10 liters 200 ml
5 gallons 13.0 ounces 15 liters 300 ml
1.9 Before Starting
1. Read safety instructions at the beginning of this
manual.
2. Fill tank with proper fuel mixture.
3. Set ramming stroke. Read Sections 1.13 and 1.14.
4. Place rammer on loose soil or gravel.
DO NOT start
rammer on hard surfaces such as asphalt or concrete.
1.10 To Start
1. Open fuel valve
(a
1
)
.
2. If engine is cold, close choke
(b
1
)
on carburetor.
3. Open throttle no more than 1/4
(c
2
)
.
4. Press button
(f)
on carburetor twice.
5. Pull starter rope
(d)
until engine starts.
6. Open choke
(b
2
)
on carburetor as engine warms up.
Note: Cold engine should run approximately one
(1) minute at idle
(c
1
)
to warm up.
1.8 Application
Rammers are designed to compact loose soils and
gravel to prevent settling and to provide a firm, solid base
for the placement of footings, concrete slabs, founda-
tions, and other structures.
WACKER