manualshive.com logo in svg

Wacker Neuson 803 Dualpower, Operator'S Manual

The Wacker Neuson 803 Dualpower is a compact and versatile construction machine designed for maximum performance. Enhance your productivity with our comprehensive Service Manual, providing step-by-step instructions and troubleshooting tips. Download the manual for free at manualshive.com, empowering you to confidently operate and maintain your equipment.

Share
Download
background image

OM 803 us – Edition 3.7 * 803b330.fm 

3-39

Operation

Retracting seat belt (from serial no. AI01201))

Warning!

WARNING
Injury hazard when operating the machine without fastening 
the seat belt!

Can cause serious injury or death.

•

Operating the machine without fastening the seat belt is prohibited under 
any circumstances.

•

Seat belt must not be twisted.

•

The seat belt must run over the hips – and not over the stomach.

•

Do not place the seat belt over hard, edged or fragile items (tools, rulers, 
glasses, pen) carried inside your clothes.

•

Never buckle up 2 persons with one seat belt.

•

Check the seat belt condition regularly. Have damaged parts immediately 
replaced by a Wacker Neuson service center.

•

Always keep the seat belt clean, as coarse dirt can impair proper functioning.

•

Seat belt buckle must not be obstructed by foreign bodies, otherwise the 
buckle latch cannot lock into place.

•

Depending on the situation, traveling over very short distances with a low-
ered rollbar is allowed (in case of low clearance heights, for example) 

– see chapter

 Operation with lowered ROPS rollbar

 on page 2-9.

After an accident the belt strap is stretched and no longer serviceable. In an 
accident, the seat belt does not provide enough safety!

•

Replace the seat belt after an accident.

•

Have fastening points and seat fixture checked for bearing capacity.

Summary of Contents for 803 Dualpower





































































































































































































































Reviews:

No comments

Related manuals for 803 Dualpower

Komatsu PC160LC-8 Brochure preview
PC160LC-8
Brand: Komatsu Pages: 8
Komatsu PC290LC-10 Operation & Maintenance Manual preview
PC290LC-10
Brand: Komatsu Pages: 31
Komatsu PC128US-8 Shop Manual preview
PC128US-8
Brand: Komatsu Pages: 41
Komatsu A22001 Shop Manual preview
A22001
Brand: Komatsu Pages: 61
Forum SDL-100/1 Operation Manual preview
SDL-100/1
Brand: Forum Pages: 50

Brands by name

Popular brands

Load more brands