8
TRANSPORT
Once the machine has been positioned on the loading platform, also rest the bucket on it lightly and
block the machine in a longitudinal direction by inserting wedges to the outside of the front and rear
axle tyres.
For transversal and vertical blocking use belts to prevent lateral and vertical movement
owing to jolts during transport.
Measure and check the maximum height of the load. During transport always follow the road
regulations and the specific regulations in force in the various countries of transit.
LIFTING
Check that the cabin is correctly fixed to the frame before lifting the machine.
Use the 4 supplied eye-bolts to lift the machine, by fixing them to the special seats located on the
roof of the cabin.
If the eyebolts are removed, close the four seats with the plastic caps
supplied. Any infiltration of water could seriously damage the electrical
system of the right-hand and left-hand dashboard.
Restrict the lifting area, prohibiting access to foreign personnel. Do not pass over persons or things
and ensure that the loading area is free of any obstacles (electric and telephone cables, etc.).
IT IS STRICTLY PROHIBITED TO WALK OR STAND UNDER THE SUSPENDED LOADS.
- Use cables or chains with adequate capacity for the load to be lifted.
- Attach the ropes or chains to the previously bolted eye-bolts and proceed with lifting avoiding
sudden movements and dangerous machine swaying.
- During transport follow the instructions previously recommended.
EYE-BOLTS
Kg 2000
PRESENTATION OF THE MACHINE
