14
GENERAL SAFETY REGULATIONS
SAFETY REGULA
SAFETY REGULA
SAFETY REGULA
SAFETY REGULA
SAFETY REGULATIONS FOR ST
TIONS FOR ST
TIONS FOR ST
TIONS FOR ST
TIONS FOR STOPPING
OPPING
OPPING
OPPING
OPPING AND P
AND P
AND P
AND P
AND PARKING
ARKING
ARKING
ARKING
ARKING
Never leave the machine with the engine running.
After leaving the driver’s seat, and after ascertaining that there are no persons near the machine,
slowly lower and rest the equipment on the ground. Set the controls in the rest position.
If possible, park the machine in an area where no other machines are operating and where there
is no vehicle traffic.
Select a solid and level surface. If this is not possible, arrange the machine in a position
transverse to the slope, ensuring that there is no danger of sliding.
In public places or when visibility is reduced, place barriers around the machine to keep persons
away.
MAKING THE LIFTING ARMS SAFE
MAKING THE LIFTING ARMS SAFE
MAKING THE LIFTING ARMS SAFE
MAKING THE LIFTING ARMS SAFE
MAKING THE LIFTING ARMS SAFE
If the machine malfunctions or blocks with the arm raised it is necessary to make them safe,
by bringing them to the ground.
This is a very delicate operation that must be carried out by following the indications below.
1 - The operator
must remain seated
, with safety belts fastened.
2 - The area around the machine
must be completely cleared of people
.
3 - Move the key inserted in the ignition commutator to position “1” (Ref. 2 of Fig.1).
4 - Press the lifting arms safety activation deactivation button (Ref. 4 of Fig.1).
5 - Successively press the lifting arms fluctuation button (Ref. 5 of Fig.1) and the lifting arms
descend immediately
RANGER OF SHEARING
RANGER OF CRUSHING
FATAL INJURIES
ATTENTION
In case of EMERGENCY it is possible to block arm descent by pressing the same button again (Ref.
5 of Fig.1).
This operation must be carried out exclusively to make the lifting arms safe.
