Chapter 3, Operating Instructions: Cleaning and Removing the Machine
E.H. Wachs
Part No. 29-MAN-00, Rev. A
47
Figure 3-33. Secure the clamping chain in its storage
position, as shown.
Make sure you are support-
ing the machine when you
release the clamping chain. It
could shift or fall from the
pipe, causing serious injury.
10.
Lift the machine from the pipe. Set it down on a work-
bench.
11.
Squeeze the position latch lever on the left arm assem-
bly, and move the arm to the closed (storage) position.
Loop the cutting wire up between the idler wheels.
12.
Squeeze the position latch lever on the right arm
assembly, and move the arm to the closed (storage)
position.
Store the machine with all
tension relieved from the
wire. Leaving tension on the
wire could damage the wheel
liners.
13.
Make sure both position latches are locked in the
closed position.
WARNING
IMPORTANT
