DW Guillotine 208
14
Part No. 29-MAN-00, Rev. A
E.H. Wachs
Loss or Shut-Off of Power Supply
•
If the power source to the equipment is lost, immedi-
ately set the ON/OFF lever to the OFF position (hori-
zontal).
•
Disconnect power from the equipment and lock out the
power supply immediately to prevent accidental restart-
ing of the machine.
•
Follow all lock-out/tag-out procedures required at the
worksite when disconnecting or servicing the equip-
ment.
Misuse of Equipment
•
Do not use the machinery for any purpose other than the
procedures described in this manual.
•
Do not use the machinery in a potentially explosive
environment.
•
Do not use the machinery to cut pipes containing explo-
sive materials.
•
Do not operate the machinery without all covers in
place.
•
Do not climb or step on the machinery.
•
Do not reverse tool direction by changing fluid flow
direction.
The DW Guillotine should never be oper-
ated in reverse direction.
•
Do not perform any set-up, maintenance, adjustments,
service, or disassembly of the machinery without first
disconnecting the hydraulic hoses and performing the
required lock-out tag-out (LOTO) procedure to isolate
power from the DW Guillotine.
•
Always put the ON/OFF handle in the OFF position
when the machine is not operating, to prevent accidental
starting of the machine (for instance, by turning on the
HPU while connected to the DW Guillotine).
Potential Hazards
Cutting Parts.
The DW Guillotine can cut human flesh if
contact is made while the wire is rotating. Keep clear of all
moving parts when operating the machine.
