Chapter 1, About the DW Guillotine 208: Equipment Description
E.H. Wachs
Part No. 29-MAN-00, Rev. A
7
Figure 1-5. The photo shows the controls on the
machine.
Figure 1-6. Refer to the wire tension gauge to set the
tension and operate the saw.
• Before cutting, turn the tension knob to set the
pointer at the
SET
position.
• During cutting, operate the feed handle to keep the
pointer at the
CUT 1
position.
• For cutting heavy wall pipe, operate the feed handle
to keep the pointer at the
CUT 2
position.
Wire tension
instruction label
Saw ON/OFF
knob (in OFF
position)
Wire tension
knob
