DW Guillotine 208
42
Part No. 29-MAN-00, Rev. A
E.H. Wachs
Cutting Operation
Water is required to cool and
lubricate the wire during cut-
ting, and to reduce airborne
cutting debris. Do not operate
the machine without a water
source for the sprayer. During
operation, make sure that
water is sprayed continuously
on the wire at the cut loca-
tion.
Always wear eye and ear pro-
tection when operating the
DW Guillotine.
The DW 208 can cut human
flesh if contact is made while
the wire is rotating. Keep
clear of all moving parts when
operating the machine.
1.
A hand sprayer tank and hose are provided to supply
coolant. Attach the hose from the tank to the coolant
fitting on the saw. If a worksite water supply is avail-
able, you can attach a garden hose to the fitting.
Figure 3-29. Attach the hand sprayer tank or a gar-
den hose to the coolant connector.
2.
Turn the feed handle to advance the bow down until
the wire is close to the pipe surface.
The saw will start if the lever
is in the ON position when
you start the HPU. Always
keep the handle in the OFF
position when the machine is
not cutting.
3.
Make sure the ON/OFF knob is in the OFF position.
CAUTION
WARNING
Coolant (connect to coolant
tank or water supply)
WARNING
