Technical Documentation
Seite
12
von
31
4. ISO-VT:
OPUS A6 2
nd
generation can be used as an ISO-VT slave in accordance with the
ISO-11783 standard and DLG conformity.
5. Wachendorff Board Support Package (BSP):
Based on the operating system the Wachendorff BSP provides all the necessary
interfaces to control the internal functionality of the unit (e.g. activation of the
backlight display, processing key activation, etc.).
This software is ready installed on all OPUS A6 2
nd
generation delivered together
with the operation system. For further information please refer to the
C/C++
Developer Guide.
6. Universal Downloader:
To download software from the PC to the terminal the Universal Downloader 4 is
provided. It supports a download via USB stick and Ethernet. The Universal
Downloader 4 also stores the software, installs it and restarts the application on the
terminal. It is part of the Wachendorff Toolchain and documented in the
Operator
Manual Projektor Tool III.
Please take notice of the following recommendation and prerequisites for the
computer used to the application design and /or programming:
- Using Projektor Tool and CoDeSys for the development it is recommended to
use the PC with Windows XP operational system (for CoDeSys it may by
younger), at least 2 GB free hard disk capacity and 2 GB RAM. Serial port is
recommended.
- Programming with C/C++ Linux operational system is prerequisite.
3.5 Development Kit
For programming the graphical user interface of the OPUS A6 2
nd
generation some
different development kits are provided.
The operator panel OPUS A6 2nd generation may only be handled
due to the according operation manual.
