![background image](http://html2.mh-extra.com/html/wac-lighting/5222/5222_installation-instructions_3105639005.webp)
WAC Lighting retains the right to modify the design of our products at any time as part of the company's continuous improvement program. November, 2019
waclighting.com
Phone (800) 526.2588
Fax (800) 526.2585
Headquarters/Eastern Distribution Center
44 Harbor Park Drive
Port Washington, NY 11050
Central Distribution Center
1600 Distribution Ct
Lithia Springs, GA 30122
Western Distribution Center
1750 Archibald Avenue
Ontario, CA 91760
INSTALLATION INSTRUCTIONS
Adjustable Beam Wall Wash
5222
3.
TREE MOUNT ACCESSORY:
The tree mount accessory is a way for fixtures to be mounted on the
trunk or a branch of a tree while minimizing damage to the tree.
Installation with Wood Screw Bolt:
1. Mark the screw hole locations at the point of installation.
2. Thread one hex nut from the flat side of wood screw bolt
until end of threaded.
3. Use a wrench to screw the bolt into the tree until
unthreaded portion of the bolt meets the surface of the
tree (Do this for all three bolts).
4. Place the tree mount junction box onto the bolts and
secure it using additional hex nuts.
5. Attach light fixture and lead wire through the junction box.
Place all wire nuts into the tree mount junction box.
Installation with Wood Screw Bolt:
1. Mount the junction box mounting bracket onto the back of the
tree mount junction box with 4 screws (Leave the wood screw
bolts as they are not required for this installation).
2. Put the ratchet strap though the junction box mounting bracket
and tight the strap onto the tree.
3. Secure and tighten the strap by using the ratchet.
4. Attach light fixture and lead wire through the junction box.
Place all wire nuts into the tree mount junction box.
Fixture
Hex Nut
Tree Mount Junction Box
Wood Screw
Tree
Fixture
5000-TCL
Tree Mount Junction Box
5000-TST
Junction Box
Mounting Bracket
5000-TST
Junction Box
Mounting Screw
Tree
5000-TST
Strap
5000-TST
Ratchet
NOTE: Due to tree growth, annual inspection of the strap is required to ensure that the fixture is secure. Failure to do so may cause the
fixture to fall from the tree, or damage to the fixture or other items.