WAC Lighting retains the right to modify the design of our products at any time as part of the company's continuous improvement program. November, 2019
waclighting.com
Phone (800) 526.2588
Fax (800) 526.2585
Headquarters/Eastern Distribution Center
44 Harbor Park Drive
Port Washington, NY 11050
Central Distribution Center
1600 Distribution Ct
Lithia Springs, GA 30122
Western Distribution Center
1750 Archibald Avenue
Ontario, CA 91760
INSTALLATION INSTRUCTIONS
Adjustable Beam Wall Wash
5222
Fixture Head
Fixture Body
Horizontal Shroud
Thumb Screw
Vertical Shroud
(Not Provided)
ACCESSORIES
1.
COLOR LENS:
Colored lenses come in red, blue, green, amber, frosted, and beam
spread to filter the light coming out of the fixture.
Installation:
Push the lens onto the center of the clip and push
them onto the front of the fixture.
LENS-3X5-xxx
LENS CLIP
(Included in LENS-3x5-xxx)
ACCESSORIES
2.
SURFACE MOUNT ACCESSORY:
The surface mount accessory is used to mount the fixture to a hard
surface like wood or cement or as alternative to the mounting stake.
Installation:
Mount the accessory to a hard surface using No. 10
Philips head screws that are at least half an inch long. If mounting
on concrete or a similar surface, first use a plastic anchor sized
for No. 10 screws. If mounting on a soft surface first attach the
included spikes.
Create a route underneath the accessory for your wire to travel
through. Lead your wire through the created route and screw your
fixture onto the surface mount accessory.
Removable Spike
No. 10 Tapping Screw
Surface Mount Canopy
