Wabtec R-150, Installation Manual

Page: 5 / 106

G&B Specialties Inc. 535 West 3 rd Street, Berwick, PA, USA Tel: 1-570-752-5901 Fax: (570) 752-639
1.0 S
AFETY
P
RECAUTIONS
WARNING:
 Refer to the Operating, Service and Parts manual for installation related
warranty issues.

Installation instructions provided below only address the Rafna
Industries railgear equipment. Applicable railway company procedures
and policies must be adhered to.
 Always disconnect the vehicle’s battery when welding on the vehicle or
railgear in order to protect the vehicle’s electrical system.
 Before performing any work under the vehicle or railgear, ensure the
engine is turned off and the parking brake is set.

Beware of all pinch points on the railgear and keep all parts of the body
clear.
 The following safety precautions should be taken before the vehicle is
tested or operated:
 Read the Operating, Service and Parts Manual
 Visually inspect the railgear for damaged or worn parts
 Perform the Alignment Procedure
 Check for loose wheels and fasteners

Check for leaking hydraulic lines and cylinders
 Check for proper lubrication
Failure to heed to any of the above mentioned warnings could result in severe
bodily injury and/or equipment damage.
I
F ANY INSTALLATION PROBLEMS ARE ENCOUNTERED
,
PLEASE CALL
G&B
S
PECIALTIES
, I
NC
.
FOR TECHNICAL ASSISTANCE BEFORE CONTINUING WITH
THE INSTALLATION PROCESS
.