Wabtec R-150, Installation Manual

Page: 35 / 106

G&B Specialties Inc. 535 West 3 rd Street, Berwick, PA, USA Tel: 1-570-752-5901 Fax: (570) 752-639
5.0 P
RE
-D
ELIVERY
C
HECK
L
IST
RAFNA R-150 HD PRE-DELIVERY CHECK LIST
Railgear Serial #: Vehicle Year:
Model: Vehicle Make:
Date Received: Vehicle Model:
Date Completed: Vehicle V.I.N. :
Installation By: Inspection By:
Check List Item Approved/Value Remarks
Hydraulic pump attached properly
Hydraulic system bled of air
Railgear pump relief set at 1800 PSI
Split loom used on all exposed hyd. hoses
Hyd. hoses clear of heat & sharp edges
Hydraulic system free of leaks
Hyd. pump grounded
Electrical connections soldered and sealed
Split loom uses on all exposed wires
Wires clear of heat & sharp edges
Rail sweeps installed
Rear mounting plates parallel to the ground
Rail wheel pressures adjusted Check tire air press
Front left
Front right
Rear left
Rear right
Railgear alignment completed
Distance between rail wheel flanges
Min 53-
7

16
”
Max 53-
9

16
”
Front rail wheels
Rear rail wheels
Rail sweeps adjusted
1

8
” above track
Front railgear is 2-3° past vertical on rail
Rear railgear is 2-3° past vertical on rail
Rail wheel bearings end-play adjusted
Distance front rail wheel flange to ground Min 5-½”
Distance rear rail wheel flange to ground Min 7-½”
Front and rear lock systems engage easily