517
panting
inches
515
Latex
paint /
acrylic / enamel
521
Filter type
511
615
517
Size
0.015” 215 315 415
Paint
321 421
Mesh 150
0.019” 219 319 419
621
0.011” 211 311 411
priming
519
10 15
thirty
Mesh 30
617
The width of the applied belt in cm
25
Mesh 100
Application
513
Mesh 60
0.021”
10. NOZZLE TIP SELECTION CHART
0.013” 213 313 413
613
611 Stain, varnish,
primer
0.017” 217 317 417
20
619
1. Used paint
Valuable notice:
Using a good quality spray tip that is appropriate for your painting project is critical to getting good spraying
results. The spray nozzle controls the amount of paint applied. When choosing a nozzle, decide the size of
the orifice based on three factors:
The size of the nozzle orifice controls the flow rate - the amount of paint that comes out of the gun.
5*5=25cm
Nozzle orifice size
17 is the nozzle orifice diameter in thousandths of
an inch, or 0.017”.
Consider the coating and the sprayed surface. Make sure you use the best nozzle orifice size for your
coating and the best nozzle width for that surface. Such information can be found in the technical data sheet
of a given paint.
It is always better to choose a machine with a larger capacity, for example, if you plan to use the 0.48mm
(0.019'') tip frequently, the capacity of the aggregate should be increased by one tip hole - 53mm (0.021''
tip). Tip wear increases hose tip size.
Multiplied by 5, the result is the width of the paint
strip at a distance of about 30 cm from the wall.
Choosing the right nozzle
Select an sprayer based on the types of coatings you will be spraying and make sure the largest tip (orifice
size) you intend to use is within the maximum tip size range the sprayer can handle.
3. Ability of the operator of the device
The width of the nozzle
determines the width of the stripe. Narrower nozzles provide a thicker coat
and wider nozzles provide a thinner coat of paint.
2. Painted surface
Use larger nozzle orifice sizes with thicker coatings and smaller nozzle orifice sizes with thinner coatings.
14
Wabrotech.pl
WABRO sc ul. Arki Boÿek 2A, 41-910 Bytom
NIP: PL6263032331 | Regon: 381911373
Machine Translated by Google
WABRO sc ul. Arki Bożka 2A, 41-910 Bytom
NIP: PL6263032331 | Regon: 381911373