6. START-UP
WABRO sc ul. Arki Boÿek 2A, 41-910 Bytom
NIP: PL6263032331 | Regon: 381911373
Wabrotech.pl
6 Check the electrical service. Make sure your
electrical outlet is properly
grounded. extension cords
can affect generator performance. Use
more shower hose (maximum extra 45
meters), not a longer extension cord.
Working on a poor quality extension cord
will damage the control unit.
3. Place the suction hose with the discharge
pipe in a container with water.
8. Turn off the power switch.
4. The service valve should be placed
vertically downwards in the overflow
position first.
cable socket.
1. First make sure the ON/OFF switch is in
the OFF position.
5. Connect the generator to an earth ground
6. Turn on the device.
2.
When starting the chiller for the first time,
the potentiometer is set to low pressure.
Start with this slowly increasing until you
reach the value you need.
That
7. Turn the pressure regulator clockwise to
the required torque.
7 Connect the generator. First, make sure the on/off
switch is set to off and the pressure adjustment
potentiometer is turned fully counter-clockwise.
Connect the sprayer to a grounded electrical outlet
that is at least 10 feet (3 m) away from the spray
area to reduce the risk of sparks, fumes, or dust
particles.
Clockwise: stronger/higher pressure
Counter-
clockwise:
weaker/lower pressure
10
Machine Translated by Google
WABRO sc ul. Arki Bożka 2A, 41-910 Bytom
NIP: PL6263032331 | Regon: 381911373