Wabrotech.pl
WABRO sc ul. Arki Bozka 2A, ul. Arki Boÿek 2A
NIP: PL6263032331 | Regon: 381911373
SWITCH
Shift the gear selector only when the machine is at a complete stop or when the power is off.
2. Set the speed switch to the "H" position to make the machine run at high speed and high torque. This
setting is suitable for drilling with small diameter drill bits.
The speed and therefore the operating torque can be selected using the gear selector.
To release the trigger lock, press down gently and release the trigger lock. The switch will return to the "OFF"
position.
1. Set the speed switch to the "L" position to run at low speed and high torque. This setting is suitable for
drilling with large diameter drill bits.
Do not change gear when the machine is running at full speed.
SPEED CHOICE
4. Connect the vacuum cleaner and start working.
The machine has a trigger switch. To start working, press the trigger to start the engine. To lock the switch,
press the lock button which locks the switch in the "ON" position.
If the spindle does not work or a specific noise is heard when the motor is turned on, the switch is not in the
correct position. Turn off the engine immediately, then set the switch carefully.
3. Remove the water connection and attach the adapter to the vacuum cleaner.
7
Machine Translated by Google
