WABECO CC-F1220 hs, Operating Instructions Manual

Page: 4 / 78

4
Index
14. Control elements 34
15. Drawings and legends 36
15.1 Milling head with pneumatic tension 36
15.2 Tensioning mechanism 38
15.3 Z-column with vertical slide 40
15.4 Spindle Z-axis 42
15.5 Cross slide support 44
15.6 Spindle X-axis 46
15.7 Spindle Y-axis 48
15.8 Limit switch X-axis 50
15.9 Limit switch Y-axis 50
15.10 Limit switch Z-axis 51
15.11 Tool changer 52
15.12 Tool support disk 53
15.13 Support arm tool support disk 54
15.14 Gripper 56
15.15 Support arm gripper 58
15.16 Machine safety cabin 60
15.17 Coolant unit 61
15.18 Control panel 62
15.19 Support arm control panel 64
15.20 Machine base cabinet 65
16. Circuit diagram 66
16.1 Overall connection diagram 66
16.2 Axis motor and limit switch connection X-, Y-, Z-axis 67
16.3 NC-rotary table 67
16.4 Axis motor and limit switch connection V-, W-axis 68
16.5 Sensors / relay 69
16.6 Legend for circuit diagrams 70
16.7 Pneumatic diagram tool changer 72
17. NC-rotary table (optional) 73
17.1 Clamping of workpieces on the NC-rotary table 73
17.2 Swiveling the worm shaft in and out 73
17.3 Setting the axial play of the NC-rotary table 74
17.4 Removing the NC drive unit 75
17.5 Setting the axial play of the worm shaft 76
17.6 Setting the axial play of the eccentric tappet 76
17.7 Drawing and legend 77