WABECO CC-F1220 hs, Operating Instructions Manual

Page: 19 / 78

19
4.6 Electrical equipment
The frequency-regulated main drive motor is delivered already installed
■ The under-voltage trigger is integrated in the electronics of the motor
■ The ON/OFF switch has to be switched on again also after an interruption of power
■ If the main propulsion motor is overloaded, it switches off automatically.
■ The main propulsion motor can only be reactivated after a short downtime.
■ For this purpose, first switch the machine off via the ON/OFF switch; wait 5 seconds and reactivate
5. Achieving optimum results and avoiding incorrect usage
■ Use of suitable processing tools.
■ Adaptation of revolution setting and feed to the material and workpiece.
■ Clamp the tool in such a way that the clamping point is as close to the workpiece as possible.
■ Clamp the workpieces firmly and without vibrations.
■ The use of coolant and lubrication to increase the durability of the tool, improve surface quality and
accuracy.
■ Clamp processing tools and workpieces on a clean clamping surface.
■ Lubricate machine sufficiently.
■ Set the bearing clearance and guides correctly.
4. Specifications regarding the machine