WABECO CC-F1220 hs, Operating Instructions Manual

Page: 18 / 78

18
4. Specifications regarding the machine
4.5 Revolution setting
Depending on the material (e.g. steel, aluminum), a specific cutting speed is required for milling.
In order to always be able to select a cutting speed suitable for the material of the workpiece and the
milling diameter, the revolutions of the tool spindle can be infinitely adjusted at the potentiometer from
100 to 7500 rpm in the 2.0 kW motor.
The potentiometer ((8) of the control panel) allows the infinite setting of the revolutions of the tool spindle
from 100 to 7500 rpm . In order for the revolutions to be activated correctly via software, the potentiome-
ter must be set to 100%. During the operation it can be used to minimally adjust the revolution according
to the processing conditions
2.0 kW motor
% Revolutions rpm
2 50
3 100
4 200
5 350
10 700
15 1000
20 1400
25 1700
30 2100
35 2500
40 2900
45 3200
50 3600
55 4050
60 4500
65 4800
70 5200
75 5600
80 6050
85 6500
90 6900
95 7200
100 7500