WABECO CC-F1220 hs, Operating Instructions Manual

Page: 29 / 78

29
10. Maintenance
A long lifetime of the machine will depend on the appropriate care and maintenance.
■ All maintenance and repair works may only be executed with unplugged safety contact plug.
■ The machine must be cleaned after each use.
■ If the machine is set up in a wet room, all exposed parts must be oiled after each use to prevent
corrosion.
■ Always lubricate all moving parts well.
■ In the event of bearing or slide play, immediately adjust in order to prevent it from destroying the
bearing or slide guide.
Approximately every 100 operating hours
■ Check the tension of the gear belt and adjust if necessary
■ Check the play in the guides and feed spindles and set if necessary