54
6
7
9
6
7
14
33
8
10
18
9. 2-axis coordinate table K400
9.7 Attachment kit for attached vernier calliper for 2 axes and spindle Y axis
9.7.3 Mount the attached X-axis vernier calliper to article number 24410
1. Hold the attached vernier calliper (9) on the two attached vernier calliper brackets left (8) and right (10)
2. The rear holes in the display of the attached vernier calliper (9) must align with the rear slots in the X-axis vernier
calliper bracket (18). Shift the display adequately for this
3. Use the screws (14) to screw the display of the attached vernier calliper (9) through the slots of the
X-axis (18) vernier calliper bracket from below
4. Tighten the screws hand tight using a Phillips head screwdriver
5. Align the fastening holes of the attached vernier calliper (9) with the external holes of the 2 attached vernier callipers
brackets left (8) and right (10)
6. Fit the washers (6) onto the screws (7) and insert the screws (7) into the fastening holes of the attached vernier
calliper (9).
7. Use a 3 mm hexagon socket wrench to screw the 2 screws (7) hand-tight into the external fastening threads intend-
ed for this in the 2 attached vernier calliper brackets left (8) and right (10).
8. Use the hand crank (33) to move the X-axis to the 2 end positions of the attached vernier calliper (9) and then tight-
en the corresponding screws (7). This process enables the attached vernier calliper (9) to be optimally positioned.
9. Any required height adjustment of the attached vernier calliper bracket on the left (8) and right (10) can be made by
loosening the screws (7) which clamp the attached vernier calliper bracket in the front T-groove using a 3mm hexa-
gon socket wrench with a spherical head
10. Retighten the screws (7) following the height adjustment.
11. Use a Phillips head screwdriver to tighten the 2 screws (14) on the display of the attached vernier calliper (9)
12. Then use the hand crank (33) to move the Y-axis to the two end positions of the attached vernier calliper (9) and
check the attached vernier calliper for ease of movement
