49
9. 2-axis coordinate table K400 and K600
9.6 Attachment kit for attached vernier calliper for 2 axes and spindle Y-axis
9.6.1 Replacement of the spindle Y-axis
25
24
27
28
26
18
1
25
24
23
Assembly of the extended Y-axes spindle
1. Lubricate the extended Y-axis spindle (1) in the area of the spindle bearing (26) and the spindle threads with
class 2NLGI multi-purpose grease
2. Lubricate the contact surface of the spindle bearing (26) in the area of the adjusting ring (25)
3. Install the extended Y-axis spindle (1) in the coordinate table in reverse order
4. Check the spindle bearing play (26) after assembly and readjust if necessary
5. Clamp the Y-axis with the 2 fastening screws for this
6. Loosening the threaded pin (24) with a 2.5 mm hexagon socket wrench makes the adjusting ring (25) movable again
7. Turning the hand crank (19) clockwise reduces the play to a minimum.
8. This increases the initial tension of the cup spring (27).
9. In this position, press the adjusting ring (25) against the contact surface of the spindle bearing (26).
10. Retighten the threaded pin (24).
11. Loosen the 2 fastening screws of the Y axis again
Caution:
The 2 threaded pins (23) and (24) may only press against the key surfaces on the spindle (1) which are
intended for this. The fitted surface of the spindle (1) can otherwise become damaged!