42
Picture 2
8. Tapping attachment order no. 35805
8.1 Handling
Lower the machine support (9) of the drill stand respectively drill/milling stand with clamped tapping attachment (2 - 5)
until the workpiece to be drilled. The thread depth can be adjusted exactly by means of the adjusting ring (2)
(Picture 1)
.
Cut the thread with the help of the adjustable tap wrench. If the ring (2) arrives on the receptacle (4)
(Picture 2)
, the
desired thread depth is reached.
Picture 1
In this picture the collar is prepared for a thread length of 10 mm.
