55
a
b
c
MAINTENANCE
DANGER: To reduce the risk of
electric shock.
Disconnect the power line plug from electric
outlet before carrying out any maintenance.
CLEANING
If lint and bits of thread accumulate in the
hook, this will interfere with the smooth
operation of the machine. Check regularly
and clean the stitching mechanism when
need.
A. Bobbin Holder
Remove the bobbin cover and bobbin.
Clean the bobbin holder.
B. Hook Race and Feed Dog
1. Remove the needle, presser foot and
holder. Remove the bobbin cover and
bobbin. Remove the screws holding the
needle plate.
2. Remove the needle plate by lifting up the
rigtht side of the plate.
3. Lift up the bobbin holder and remove it.
4. Clean the hook race, feed dogs and
bobbin holder. Also clean them, using a
soft, dry cloth.
5. Replace the bobbin holder into the hook
race so that the tip (a) fits to the stopper (b)
as shown.
6. Replace the needle plate inserting the
hook into the machine. Retighten the
screws.
Note:
* This machine is using LED light to light up
stitching area. If it is not ligtht up, call for
your dealer.
* There is no need to lubricate this machine.
Summary of Contents for N 8000
