W6 N 8000, Instruction Manual

Page: 37 / 64

35
INSERTING ZIPPERS
LAPPED INSERTION
1 Straight stitch (center needle position)
Zipper Foot (E)
CAUTION: To prevent accidents.
Zipper foot should be used for sewing center
needle position straight stitch only. It is
possible that needle could hit the presser foot
and break when sewing other patterns.
1. Baste the zipper opening to the seam line.
a: Top stitch,
b: End of opening,
c: Basting
d: Wrong Side of fabric
2. Fold back to the left seam allowance.
Turn under the right seam allowance to
form 3 mm fold.
3. Attach the zipper foot.
• Attach the left side of the presser foot pin
to the presser foot holder when sewing
the right side of the zipper, and right side
of the presser foot pin to the holder when
sewing the left side of the zipper.
4. Stitch the left side of zipper from bottom to
top.
5. Turn the fabric right side out stitch across
the lower end and right side of zipper.
6. Stop about 5 cm from the top of zipper.
Remove the basting and open the zipper.
Stitch the remainder of the seam.
A. TO OPEN THE ZIPPER WHILE
STITCHING
1. Stop stitching before you reach the slider.
2. Lower the needle into fabric.
3. Raise the presser foot and open the
zipper.
4. Lower the presser foot and continue
stitching.
a. Slider
5 mm
7-10mm
a
1