W6 N 8000, Instruction Manual

Page: 50 / 64

48
TO EDIT EACH PATTERN
You can change the settings (mirror/reverse, elongation and stitch width/length) of each
stitch pattern.
Also, you can change the thread tension of all combined patterns.
And you can add auto tack and cut function.
See inside of top cover to know the pattern which able to mirror/reverse, elongation.
Note:
Letter stitches cannot change settings (mirror/reverse, elongation and stitch width/length).
1. Touch the Edit button on the selection
screen.
LCD will change to the editing mode (width/
length).
2. As you shift the cursor, the settings of
each pattern will be indicated.
3. By touching the screen change buttons A, B,
C, you can change settings as following.
(Button B will not appear if selected
pattern is not having mirror/reverse,
elongation)
You can return to selecting mode by touching
the return button.
A. TACK AND CUT FUNCTION, STITCH
WIDTH/LENGTH
This screen will appear, when the Edit button
is touched on the selection mode.
TACK AND CUT FUNCTION
If you turn on this function by touching the
tack and cut button, machine will sew tack
and cut threads at the end of sequences.
The tack and cut mark will appear at the left
end of screen.
To cancel, touch this button again.
STITCH WIDTH/LENGTH
STITCH WIDTH a:narrower b: wider
STITCH LENGTH c:shorter d: longer
Beep sound will be heared at max. or min.
value. If value is not appeared, this pattern
can not change the setting.
Preset stitch length/width is indicated in
green color.
By shifting the cursor, you can change the
width/length of other pattern.
On the top of screen, suitable presser foot, setting of mirror/reverse, elongation are
indicated.
By touching the button B, C you can change the setting screen.
You can return to selecting mode by touching the return button.