W6 N 8000, Instruction Manual

Page: 47 / 64

45
USING THE EVEN-FEED
FOOT
The Even-feed foot accessory equalizes
the feeding of the upper and lower layers
of fabric and improves the matching of
plaids, stripes, and patterns. This foot helps
to prevent uneven feeding of very difficult
fabrics.
No. 1, 2, 12
Even-feed foot
A. ATTACHING THE EVEN-FEED FOOT
1. Remove the presser foot and holder. (See
page 8)
2. The arm of even-feed foot should ride
onto the shaft of the needle clamp screw.
3. Slide the attaching head from your left to
right so that it is fitted into the presser bar.
4. Tighten the presser foot thumb screw.
B. SEWING
Hold upper thread lightly at start of sewing
and sew in slow speed.
1 2 12
EYELET
This stitch pattern is used for making belt
holes and other similar applications.
No. 48 Eyelet
Satin Foot (B)
You can choose the 3 sizes of eyelet by
changing the stitch length.
1. Place the fabric under the presser foot
and lower it. Start the machine.
Machine will sew the eyelet and stop
automatically.
2. Press the thread cutter button and raise
the presser foot.
3. Make a hole in the center of the eyelet.
Note
Eyelet punch is not provided with this
machine.
48