42
www.w6-wertarbeit.de
Maintenance
Cleaning the sewing machine case
Switch off the machine and unplug the
power plug before cleaning!
In case the machine case becomes dirty,
clean the case of the sewing machine with a
slightly damp cloth. Wipe with a dry cloth. Do
not use organic solvents or cleaning agents.
Cleaning the hook
The hook must always be kept clean.
If dust has collected on the hook, clean it as
follows.
1
Important:
Move the needle to the
highest position using the hand wheel.
Lift the presser foot and switch off the
power switch (“0”).
2 Remove the needle, presser foot holder
and extension table.
3 Open the hook cover.
4 Open the bobbin case bar tack and pull
out the bobbin case.
5 Turn the two clamping bar tacks to the
side so that the ring cover is loosened.
6 Remove the ring cover.
1 Opening the hook cover
2 Shaft in the hook case
3 Bobbin case bar tack
4 Bobbin case
5 Bobbin case finger
6 Clamping bar tack
7 Ring cover opening
8 Ring cover
Summary of Contents for N 1615
Page 1: ...N 1615 120201 W6 N 1615 sewing machine Manual...
Page 48: ......
