20
www.w6-wertarbeit.de
Threading the upper thread/Retrieving the lower thread
Note:
The following description requires that
the steps in the chapters “Inserting the
bobbin” and “Threading the upper thread”
have already been performed.
Caution: Risk of injury!
Take your foot off the foot controller when
threading the upper thread through the eye
of the needle!
1 Hook the upper thread into the thread
guide and thread the thread through the
eye of the needle. Cut the thread with
sharp scissors to be able to thread it more
easily. Pull approx. 80 mm of the thread
through the eye of the needle.
Important
Approx. 80 mm of the thread should protrude
from the bobbin case before inserting it into
the hook.
2 Hold the upper thread with the left hand
and turn the hand wheel with the right
hand.
3 By turning the hand wheel, the lower
thread is moved up.
Both threads must be guided below the
presser foot and pulled approx. 80 mm
towards the back.
4 Once both threads have been led out, the
extension table can be reinserted.
The preparations for sewing are
completed.
Important:
Always lift the presser foot before removing
the upper thread as otherwise the thread
tension assembly may be damaged.
1 Thread guide
2 Upper thread (80 mm)
3 Lower thread loop
4 Guide the end of the thread back
5 Insert the extension table
Summary of Contents for N 1615
Page 1: ...N 1615 120201 W6 N 1615 sewing machine Manual...
Page 48: ......
