V290iA User Guide
41
C
Power Cable Specifications
This appendix lists the technical specifications of the power cable.
Power Connector Requirements
The following items are required for the V290iA power inlet matching connector:
Cable – CABLE SHIELDED 4 X 22AWG
Plug sealed – Manufactured by Tyco, MFG: 796094-2.
Pin – Sock pins 15u gold 16-18awg, manufactured by Tyco, MFG: 66101-3.
Boot #11 – Manufactured by Tyco, MFG: 207489-1.
This connector is same as the one used for the Cisco 3230.
External Cables Requirements
Use cables suitable for the environmental required specification.
Do not exceed the allowed cable length according to the common STD (Serial and
Ethernet).
Use the pin out description (refer to
Internal Connectors Description
below) to
prepare the proper cable wiring according to the specific SCADA device or
communication equipment you intend to attach to the V290iA.
