V290iA User Guide
21
4
Configuring the V290iA
The V290iA comes with a standard configuration on delivery, and requires minimal, if
any, additional configuration to operate normally. The V290iA uses the embedded
Cisco 3200-series router to enable IP routing and bridging functionality, and can be
configured to provide additional services beyond those provided by the standard
configuration. The Vyyo V284 modem is configured to work as delivered. For advanced
modifications to modem settings, refer to the
Vyyo NMS User Guide
.
The standard configuration includes default IP address and Netmask information for the
V284 modem and the Cisco router. The default IP information is as follows:
Table 1: Default IP Settings
Parameter
Value
Modem IP Address
192.168.100.1
Modem Netmask
255.255.255.0
Router Ethernet IP Address 192.168.100.10
Router Ethernet Netmask
255.255.255.240
Router VLAN Loopback IP
10.0.0.254
Router VLAN Loopback
Netmask
255.255.255.0
;
The Modem IP settings are used only for local management. The modem passes no IP
information over the network. The Modem IP settings cannot be changed.
Configuring V290iA Components
The V290iA contains two configurable components:
V284 Modem
– All V284 configuration is performed using the NMS (refer to the
NMS User Guide
).
Cisco Router
– detailed in the following section.
