Vykon JACE-700, Install Manual

Page: 14 / 36

May 2, 2011 ABOUT EXPANSION OPTIONS
Board Layout
14
Part Number 11694 Rev 1.6 JACE-700 MOUNTING AND WIRING GUIDE
|
Figure 5 JACE-700 controller main board layout details.
A JACE-700 controller ships with both option card slots 1 and 2 open. The DDR-2
RAM socket is populated with a 1GB module. A variety of communications option
cards are available. For details, see the next section
“About Expansion Options” .
About Expansion Options
The JACE-700 provides for
field-installable
expansion using these types of options:
•
Option card
— Install on connectors inside the controller’s base unit. See “About
Option Cards,” page 15.
•
Remote I/O modules
— To wire to the controller’s right-side 6-pin connector.
See “About Remote I/O Modules,” page 17.
•
MiniPCI option card
— See “About MiniPCI Cards,” page 18.
PS - OUT
PS + OUT
BB 12V
RS-485
-
RS-485 +
485 GND
PS +
PS
-
NiMH battery connector (keyed)
LEDs for USB hub port activity
Dual USB ports
Earth grounding lug
LED header
Option card 2 area including socket header
MiniPCI
socket
DDR-2
RAM
Option card 1
area including
socket header
RS-232 (DB-9) COM1
External 12V backup battery
GND
GN
D
GN
D
RS-485
support of
remote IO
modules
LEDs
LAN
n
Debug
LED
LAN1
Primary Ethernet
(RJ-45)
LAN2
Secondary
Ethernet
(RJ-45)
From
power
supply
module
Contact Inputs
Door
tamper
UPS battery
OK
UPS AC
present
LEDs
status,
heartbt
Push-
button
SW1
Serial mode select Jumper
Normal
Serial Shell