41
vwr.com I Instruction manual VWR® A Water System
4 DISPENSING WATER
Water can be dispensed from the dispenser handle either by pressing the dispense button on the
handle or from the main control console.
4.1 Dispensing RO Water
4.1.1 Press the dispense button on the dispenser to enter
Wait
mode until dispensing RO
water. Press the dispense button again to stop dispensing. Or
4.1.2
Tap the left cylinder icon to decrease the volume
to 0 L. Tap the dispense button to
enter
Wait
mode until dispensing RO water. Tap it again to
stop dispensing.
4.2 Dispensing UP Water
4.2.1 Tap recirculation icon on the main console or on the dispenser to start
recirculation. When the resistivity reaches 18.2 MΩ.cm, press the dispense icon on the monitor
or on the dispenser to enter
Wait
mode until dispensing UP water. Press the dispense icon
again to stop dispensing.
4.3 Adjusting Dispense Rate
To change the dispense rate, tap the icon or on home screen or dispenser monitor.
4.4 Volumetric Dispensing
Setting up is the same on the dispenser or the
control console.
Tap recirculation icon on the home screen to
enter Recirculation mode until the resistivity
reaches 18.2 MΩ.cm.
Tap the right cylinder icon to increase or the left
cylinder icon to decrease the volume.
You can set the volume between 0.1 and 99.9
liters.