30
vwr.com I Instruction manual VWR® A Water System
3.2.6 Dispenser Setup
Select connection mode for the dispenser from
the pull-down menu at the left corner:
Select
Wireless
for wireless connection.
Select
Wired
for the wired connection.
Tap
Query
, the system will automatically search
for the dispensers that have been installed.
Note:
The dispensers may have been prior
registered to other systems, causing problems in
installation if record in the dispenser is not
cleared. Press
Query
will clear such record.
Tap
Reset
, system will automatically reset the
address.
Tap
Config.
, system will automatically configure
the dispensers. Need to choose a dispenser as
default for each type of water. Water will come out
from the default dispenser when you tap dispense
button on the control console. Choose the Type of
the dispenser.
Note
:
An Address shown between 10 and 20
means the dispenser setup is successful.
Tap
Save
to save the configuration.
Confirm the configuration by tap
Finish
.
System will enter the home screen automatically.