4
vwr.com I Instruction manual VWR® A Water System
1 INTRODUCTION
The VWR A water system is designed to produce ultrapure water (Type I) and RO water directly
from tap water. Water quality produced meets or exceeds the corresponding ASTM, CAP, CLSI
and ISO 3696 / BS 3997 water standards.
This manual describes in detail about system performance characteristics, installation, operation,
and routine maintenance. Please read this manual thoroughly for its instructions on installation,
use and maintenance. Proper installation, use and maintenance guarantee the continuous flow
of high quality ultrapure water.
Please contact us or your local distributor if you encounter any issues during installation and use.
Professional engineers are fully trained to support you.
Safety Information
WARNING!
1)
Always power down the system before plug or unplug any hardware. Never hot swap
(hot plug) any hardware, including dispenser, monitor as it may damage control
boards.
2)
Disconnect the unit from the power supply prior to perform service work.
3)
Refer service to qualified personnel.